Forum quick links
Pump consumption
CS-2009 EAp2:Minimum Energy Performanceposted by Toni Herena Montull on
I have a proposed design with boiler and chiller, with water distribution. There are many pumps in the distribution system.
No car park or external areas
EBOM-2009 SSc7.1:Heat Island Reduction—Nonroofposted by Maya Karkour on
Hello, The project we are working on does not have any parking lots or Non roof hardscape surfaces (building footprint occupies all the site). Is this credit still achievable ?
What about buildings occupying the whole site?
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by María Fernanda Aguirre on
Hi! We have a building which occupies 100% of the project site as it is located in a densely developed area which allows it.
Equivalent standards for projects outside the USA
CS-2009 EAp2:Minimum Energy Performanceposted by Annette Kwee on
Dear All, We are currently working on projects in Germany. Are you aware of any equivalent standards available at this moment or in the proces of approval? Thanks in advance!
Utilizing the car2go program to satisfy vehicle-sharing option
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Jennifer Wright on
I am working on a mixed-use residential project that has no parking other than street parking.
reference systems for a warehouse building
NC-2009 EAp2:Minimum Energy Performanceposted by Agnieszka Rylska on
We are working on a warehouse project with small attached administration building. I have a question regarding reference systems for this project.
warehouse and storage room difference - table 6-1
NC-2009 IEQp1:Minimum IAQ Performanceposted by Noriko Nagazumi on
What is the difference between storage room and warehouse in table 6-1 of ASHRAE 62.1-2007? Storage rooms need twice the ventilation required for warehouses.
Modeling a manufacturing building
NC-2009 EAp2:Minimum Energy Performanceposted by Vassil Vassilev on
Hi, I'm modeling a manufacturing plant. The issues I'm looking for advises are related to modeling the manufacturing process and specifically: Cooling.
ANOTHER Intumescent-related product question
Healthcare-v2009 IEQc4:Low-emitting materialsposted by Andrew Gil on
we've known for years about the change in VOC classification from having a dedicated category of Intumescent Coatings to considering them as an Anti-Corrosive coating.