Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Does double stacked bicycle racks comply with the credit?

CS-v4 LTc6:Bicycle facilities
posted by  Olga Yuil  on 

Bicycle racks should reflect best practices in design and installation.

3
Profile picture for user verona
FABIO VIERO
Head of Sustainability
Manens S.p.A.
LEEDuser Premium Member
16 thumbs up
Tue Jan 15, 2019, 4:16 pm

Large building with only 3 EV parking spaces and no other parking spaces

NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehicles
posted by  Bo White  on 

Our large classroom building is on a college campus and will only have 3 parking spots total. All 3 will be designated as EV.

3
Profile picture for user bo_4
Bo White
Senior Project Engineer
NegaWatt Consulting
LEEDuser Basic Member
5 thumbs up
Tue Jan 15, 2019, 1:47 am
Default Avatar

Question: Example 1. Residential and nonresidential density calculations (BDC Page 84).

NC-v4 LTc4:Surrounding density and diverse uses
posted by  Olga Yuil  on 

Page 84 'FURTHER EXPLANATION' Section Example 1. Residential and nonresidential density calculations from the BDC Reference Guide (Updated August 2018), question:

2
Profile picture for user SDC
Kara Strong
Project Director
Sustainable Design Consulting
LEEDuser Expert
27 thumbs up
Mon Jan 14, 2019, 9:02 pm

final fit-out on tenants request -> designing provisions for negative pressure difficult

NC-v4 EQc1:Enhanced indoor air quality strategies
posted by  Mark Kumar Bose  on 

Hi,

3
Profile picture for user bose
Mark Kumar Bose
Dipl.-Ing., Immobilienökonom (ebs)
Masterplan Informationsmanagement GmbH
LEEDuser Basic Member
0 thumbs up
Mon Jan 14, 2019, 7:56 pm
Default Avatar

EA Prerequisite: Energy Performance

LEED v4.1 Discussion Forum
posted by  Cesar Ruiz  on 

I have noticed that in LEED OM v4.1 prerequisite Energy Performance the explanation about calculating the outside temperature adjustment factor is incomplete. This problem happens in both the

0
Profile picture for user bo_4

Using Trane Trace for Solar PV Modeling

NC-2009 EAp2:Minimum Energy Performance
posted by  Bo White  on 

Our building will have on-site (and dedicated campus) solar PV, and we're using Trane's Trace program for our ASHRAE 90.1 energy model.

3
Profile picture for user bo_4
Bo White
Senior Project Engineer
NegaWatt Consulting
LEEDuser Basic Member
5 thumbs up
Mon Jan 14, 2019, 7:30 pm
Default Avatar

Advanced Energy Metering Whole Building Energy Sources

NC-v4 EAc3:Advanced energy metering
posted by  susan eguia  on 

Hi,

We have Fire Station project and submitted Advanced Meter Cutsheet for Electrical.

3
Default Avatar
susan eguia
LEED Coordinator/Construction Administrator/Business Development
Building Solutions Group, Inc.
LEEDuser Basic Member
47 thumbs up
Mon Jan 14, 2019, 2:52 pm
Default Avatar

Core & Shell or Healthcare situation

LEED Rating System Selection
posted by  KATHERINE AGUILAR  on 

If the building will be constructed and leased to be used as a medical facility by an unknown operator, it is possible to apply for a Core & Shell certification?

2
Profile picture for user tristanroberts
Tristan Roberts
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Mon Jan 14, 2019, 1:37 pm
Default Avatar

Mastersite Calculations

CS-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Rooms
posted by  Ernst Schriefl  on 

Hallo,

my project consits of 7 Buildings, whiche are certified under one Mastersite.

Because of this i have serveral questions:

0

CIBSE or CFD to demonstrate compliance with natural ventilation

Mid-Rise-v4 EQp1:Ventilation
posted by  Gustavo De las Heras Izquierdo  on 

Hallo,

1
Tue Jan 22, 2019, 8:33 am