My project site is located next to one of the main arteries of Warsaw. Due to the high trafic the strip adjacent to the road is contaminated with petrol related substances (not much but still)....

Greetings,
There is an issue on applying F factor about which I'd appreciate some assistance.
The F factor in general refers to the floor slab edge insulation. Its value depends also...

Greetings,

In the IEQp1 calculation form, provided by USGBC for using in LEED v4, in the Occupancy Category pull-down menu, there is nothing related to equipment rooms, non-occupied stores...

If my project consists of 10,000sf of greenery but only 3,000sf is irrigated, do I need to insert 10,000sf or 3,000sf as a total area in the LEED Online form (both baseline and design case)?

Greetings,
There is a clarification issue while entering these values in the Baseline about which I'd appreciate some advice.
The OA flow should be identical in both models. When...

Is is correct that incineration does not qualify as...

Hello,
We are carrying out LEED certification of an office building. We have an atrium (similar to an indoor courtyard) in our building, which is mainly used as a corridor (passage) between...

Markus, thanks a lot for your answer.
Another issue appeared to this Heating only system - Baseline modeling of...

I'm working on a work center project which is located in Moskov, Russian Federation. I have a problem with area which is described as a regularly occupied area. I use 2009 edition of LEED...