Core & Shell Appendix 2 requires that the baseline core and shell HVAC system be modeled per ASHRAE 90.1-2007 Table G3.1.1A.

Due to the overload of work in the factory of doors we contracted with for our project, the doors will not be ready and supplied on time.

I cannot find the definition of parking area nor is it apparent why GBCI wants this data.

taking over a project that was set up already in LEED. in the spreadsheet there are two extra rows for items not in the project (lacqeur, and floor coating). I cannot delete them!

An industrial building client in Bangladesh wants to produce most of it's power by gas operated generator.

We submitted a green cleaning policy for a new building on a campus that has an established a green cleaning policy for several years now for all of their buildings.

I am wondering if anyone has had success submitting an ID credit in LEED NC 2009 for complying with the requirements of LEED EBOM 2009 MRc4 Reduced Mercury.

RefGuide says in page 373 "In the case of supplementary cementitious materials (SCMs) used in concrete recycled from other operations, the recycled content value can be based on the mass of the cem

Hi all! I’m modeling a 49-story building with 7 basements, and it has over 40 % (about 85 %) of its envelope covered with glazing, so I have a doubt about the calculation on the Window to Wall Ra

According to Leed NC we require for 911 FTEs x 0,5% = 4,6 Changing and Shower facilities (=5).