My project only has scrubs sink, which are exempt from LEED water use reduction requirements. The other portion of my project is undetermined, future fit-out space.

If one VAV box with a reheat coil is serving three private offices, would providing one thermostat for each office, and have the controls average the temperature requirement for each thermostat, an

Dear community, According to tables 5.5-1 (climate 1a), the Solar Hear Gain Coefficient for the proposed building should be no more than 0.25.

Hi, I am modeling a LEED CS building for which we have decided to move ahead considering the tenant space lighting design and HVAC system to achieve maximum energy savings.

Hi Eveybody, I have sent my first energy modeling, and a few commens came back, One of them referred to VAV fan powered terminals, and I copy textually the comment: "Insufficient informatin is prov

Hello, I was wondering if someone could clarify how is the Rainfall Event Interval required to calculate the minimum drawdownrate for a tank calculated. Is this something we need to calculate?

We will be tieing the new irrigation system into the existing. Do we need to meter the water use with the LEED boundary?

We have a project that is about 125,000 sf and are working with a consultant that is developing the OPR with the client and also writing the BOD for the project.

Our dining hall project is considering using ESP filtration technology in the kitchen vent hoods.

In your opinion, a vermiculite gypsum based wet mix spray - proposed to protect concrete and steel structure from fire - should be included in IEQ c4.2 for a project in Italy pursuing LEED 2009 Cor