The project site I am dealing with has a varied topography (outside Pittsburgh, PA), and I believe the geographic limitations of the site and surroundings made it difficult to meet the required...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up February 14, 2011- 9:43 am Simone, I think you had similar questions on IEQc4.1 and IEQc4.3. As discussed on those forums, this certifiations would not be accepted right now by USGBC, although that could change in the future.What are your thoughts? Log in or register to post comments Susann Geithner Principal Emerald Built Environments LEEDuser Basic Member 1297 thumbs up February 14, 2011- 11:07 am I agree. You can't used the European certificates, but we have applied for these credits successfully...

We are working on a college campus that will have a new central plant. We have a onsite micro turbine generators that provide power to the site. The heat from those turbines is used as a heat...

If a product is listed on the CHPS Low Emitting Materials Table (LEM) does it demonstrate compliance with the CA Department of Health Standard?

I think I might know this answer but I need some advice to confirm my hunch....The project I am working on is a 5,000sf university owned educational center located 30 min from an urban area. The...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up March 1, 2011- 9:40 pm Yes, but there is a special clause that you need to buy additonal RECs. This is outlined in the LEED Reference Guide, if you have a copy. If not, we can probably paste it in here, or I think you can find it being discussed in the NC 2009 forum for this credit. Log in or register to post comments ...

I am part of a new construction supermarket project that intends to seek certification under the LEED NC for Retail rating system. Under the Retail rating system, projects must meet the daylight...

We are currently working on a project with a large amount of storefront glazing and I'm curious if anyone has sucessfully utilized the University of California's program WINDOW 5 to determine the...

Has anybody grouped room types for Table IEQp3-1? I am trying to understand exactly how to do this. Simplified scenario: The project has 10 small 100 SF rooms, exactly the same. Do I list the...

OK...so I feel kind of dumb asking this question because it seems like I should be able to figure out the answer from the 2009 User Guide but of course it's clear as mud so I humbly ask for...