Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Bio-fuel Boilers

NC-2009 EAc2:On-Site Renewable Energy
posted by  Martin Meehan  on 

From my reading of the Reference Manual for this credit it seems that Bio-fuel can only be used to generate electrical power on-site, and not to power bio-fuel boilers for water heating or space he

5
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Aug 21, 2013, 3:01 pm

Sub-consultant to CxA

NC-2009 EAc3:Enhanced Commissioning
posted by  Lise Dannesboe  on 

Hi. We have a project over 50.000 sf, where an individual from the Owner is CxA. He would, however, like to hire a sub-consultant to handle some of the work during the construction phase.

5
Sustainability Manager
COWI
LEEDuser Premium Member
54 thumbs up
Wed Aug 21, 2013, 9:48 am

Signatories

NC-2009 IEQc7.2:Thermal Comfort—Verification
posted by  William Weaver  on 

I've noticed a subtle change with the most current templates. Particularly, the signatory for this credit no longer specifies who must sign the template.

2
LEED AP BD+C, O+M, Green Globes Professional
JLL
LEEDuser Basic Member
112 thumbs up
Tue Aug 20, 2013, 9:45 pm

C&S for a mixed use building

CS-2009 EAp2:Minimum Energy Performance
posted by  Santiago Rodriguez  on 

Dear forum, We have a project that is seeking the C&S LEED Certification.

3
Tue Aug 20, 2013, 9:20 pm

Multiple medical buildings on one campus

LEED Rating System Selection
posted by  Christopher Striegel  on 

I am on a project that has a medical campus of seven buildings of which five will require various levels of renovation.

4
Tue Aug 20, 2013, 6:39 pm

Fancoils in the same Area

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Marina Andrade  on 

Hi! When two or more fancoils meet the same area, can be considered as a single zone, correct? Thanks!

2
Tue Aug 20, 2013, 4:14 pm

Small Laundry Rooms and Exhaust

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Adam West  on 

Has anyone not exhausted a small laundry room in a commercial building and had this strategy approved through a review?

6
Mechanical Engineer
Integral Group
LEEDuser Expert
342 thumbs up
Tue Aug 20, 2013, 3:43 pm

21 points

CS-2009 EAp2:Minimum Energy Performance
posted by  Markievicz E  on 

Hi Guys I have a pleasant dilemma. The project is new build offices in climate zone 5a.

4
Default Avatar
Principal : Energy / Electrical Engineer
BuildingPhysics South Africa
LEEDuser Basic Member
94 thumbs up
Tue Aug 20, 2013, 2:22 pm

Applies to equipment as well as building lighting?

Healthcare-v2009 MRc4.1:PBT source reduction - mercury in lamps
posted by  Chris Flint Chatto  on 

We have a question whether this credit applies to lighting integrated with medical equipment, or if the credit only applies to permanently attached building fixtures, like the low-VOC and other MR

2
Tue Aug 20, 2013, 2:13 pm

Possibility to register under LEED 2009

General forums
posted by  Francesco Allaix  on 

Thank you for the information Tristan. Would you perhaps know when the registration under 2009 ends.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Aug 20, 2013, 1:49 pm