I am working on a winery facility which includes office spaces and manufacturing spaces. Does LEED NC require the building envelop parameters (e.g. U-values, SC) of manufacturing parts of the...

Hello guys.

I am modelling a hotel for LEED purpose. I need some help to chose the right table to calculate the Minimum Efficiency Requirements

My system is package terminal heat...

We are pursueing OPTION 1 (Whole Building Simulation). Thus we also have to comply to the mandatory provisions, e.g. section 9.4 for lighting.
Section 9.4 does not mention the interior...

Assuming a 10 storey building where the first three floors are retail floors and the remaining 7 floors are office floors, is it generally possible to use the building area method?
Is it...

Per the LEED reference guide and LEEDonline signatory, copper piping joints can only be one of the following:
- mechanically crimped
- soldered in compliance to...

Hello,

We have a building that is naturally ventilated and to comply with ASHRAE 62.1-2007 (prerrequisite) we are planning to place operable windows. We made the calculations to get the...

Hello.
my project is in outside of USA.
Because of that, there are many obstacles to get...

Hi,

LEED Reference Guide For Green Interior Design And Construction says in chapter EAc1.3 (# 6. Calculations) on p.168 that the standard has 2 energy comparison methods, both of which are...

in one of our projects prerequisite IEQp1 minimum indoor air quality performance was denied both in design preliminary review and final review. then we submitted it again after doing the required...

Hi Tristan Roberts-

With the development and release of LEED 2012 in Nov. this year, i would like to know if the LEED GA&LEED AP exam will have significant changes and evolution, when...