I’m working on a Project in Portugal, which consists in a 13.400m2 site, with 6000m2 rooftop (harvests rain), 2500m2 green roof, 2735m2 of gardens, 306 m2 of planters and 1840m2 of impermeable...

If I understand correclty, we can use the table in the reference guide with several BMPs to determine the removal efficiency. In this table however there are 2 values : average TS removal % and...

Our business uses large/wide format printing for design plans quite a bit and the paper has accounted for a large portion of our purchasing.
I've gone to our vendors to see about...

I am involved with a project in which the design team would like to select compact storage bins. This strategy will greatly reduce the size of the building compared to an identical building with...

Our IEQc6.1 credit was approved during the design phase based upon the following: The space is a large open area with cubicle workstations. Each work station has it's own, individually controlled...

The credit intent and application is very clear as stated above: "Private offices and open space offices need multiple controls for 50% of occupants. One control in each conference or meeting...

Simple question - My project is not yet registered so I can't see what documenation is necessary to substantiate claims of water efficiency. Does LEED ask for spec sheets and pictures of old...

We hope that this is a valuable credit to encourage the design of homes that allow for aging in place, flexibility for changing needs and the extension of the life of the home for economic and...

We have a library project that is reusing metal shelving. Since it is being used for the same purpose this credit indicates it should be part of MR1.2. Should the surface area be calculated as...

Our project has existing non-structural plaster walls that will be reused in place. The current design calls for touch up of existing plaster walls, but the owner is also contemplating full skip-...