Can direct reading instruments be used to measure VOCs and PM10? Another user asked specifically about the GrayWolf IAQ equipment and I was also wondering if it can be used for EQc3.2.

Dear All, Our project has a signed agreement with a nearby university, valid until June 2013.

My LEED boundary consists of the following: a) A Commercial building b) Three small service buildings ( one which is a substation ) c) A swimming pool d) A tennis court My question is as follows

Will LEED round up the saving percentage to the nearest integer? e.g. 19.8% to 20%? Thanks in advance

Hello, We have a project in Russia under LEED for CS-2009 sertification. There are technical rooms with epoxy flooring. 1) Can anybody confirm if I am wrong or right?

Does anyone have experience doing envelope commissioning for an existing building? The project will be a Major Renovation with fairly extensive HVAC upgrades.

We registered the Project for LEED CI. A space of about 2000 sqft. As the space was small the client was able to outfit the space in 3 weeks time and occupied the space immediately after.

We would like to know if the project can obtain its LEED certification prior to submitting the Final M&V Report, which is dependent upon 1 year of post-occupancy energy use data.

Is there any way to complete a legally binding document when there is no tenant identified? If I am constructing a building, but not installing fixtures, then an agreement is required.

Is it a mandatory requirement to install a domestic hot water system in a LEED project?