Topic | Recent |
---|---|
How do you get two commissioning projects to qualify?NC-2009 EAp1: Fundamental Commissioning of Building Energy Systemsposted by Michael Dudek on Nov 1, 2010, 1:16 pm
My firm is a long-standing A/E firm that has multiple senior and junior engineers that are very capable of... Last reply: Tristan Roberts, Nov 2, 2010, 11:14 pm |
|
Mechanical Engineer Signature Required?EBOM-2009 EAc5: Enhanced Refrigerant Managementposted by Andrew Barnes on Nov 1, 2010, 4:46 pm
I (not a mechanical engineer) calculated the leakage rates for this credit, but LEED online has a 'Required Signatory' box for this credit. Is this necessary to be signed off on? Last reply: Tristan Roberts, Nov 2, 2010, 11:07 pm |
|
The baseline flow rate forCI-2009 WEp1: Water Use Reductionposted by kyle atkinson on Nov 1, 2010, 1:50 pm
The baseline flow rate for lavatory sinks was reduced from 2.5 GPM to 0.5 GPM following after 2009. Last reply: Tristan Roberts, Nov 2, 2010, 11:05 pm |
|
green roof exemplary performanceNC-2009 SSc7.2: Heat island effect - roofposted by Kim Sosalla-Bahr on Nov 2, 2010, 1:23 pm
I have a question about meeting exemplary performance for credit SS 7.2. The reference guide states that, " Projects may earn an Innovation in Design credit for exemplary performance by... Last reply: Tristan Roberts, Nov 2, 2010, 10:52 pm |
|
Missing zip codesEBOM-2009 RPc1: Regional Priorityposted by Abigail Johnson on Nov 2, 2010, 8:07 pm
My project is located in 23707 in Hampton Roads Virginia. It is not listed in the... Last reply: Tristan Roberts, Nov 2, 2010, 9:20 pm |
|
DocumentationEBOM-2009 MRc5: Sustainable purchasing - foodposted by Andreas Hintz on Oct 1, 2010, 8:07 am
Hi, I`m working on an office building to gain LEED... Last reply: Natalie Bodenhamer, Nov 2, 2010, 6:48 pm |
|
re: documenting a credit from another LEED rating systemCI-2009 IDc1: Innovation in Designposted by Cara Mae Cirignano on Nov 2, 2010, 2:13 pm
Hi Leonard - |
|
Upload requires WEP1-1 whichCS-2009 WEp1: Water Use Reductionposted by eileen hughes on Oct 22, 2010, 9:47 am
Upload requires WEP1-1 which is a plumbing fixture & fitting schedule. Last reply: Karen Blust, Nov 1, 2010, 7:36 pm |
|
Re-used Food Service/Commercial Kitchen EquipmentCI-2009 MRc3.1: Materials Reuseposted by Suzanne Painter-Supplee, LEED AP+ID&C on Oct 27, 2010, 8:09 pm
I have had conflicting information regarding re-used commercial kitchen equipment, whose energy and water are measured as 'process.' Some say yes, others no. There are mechanical, electrical and... Last reply: Suzanne Painter-Supplee, LEED AP+ID&C, Nov 1, 2010, 11:47 am |
|
Multi-floor tenant- LEED CI project on single floorCI-2009 SSc3.2: Alternative transportation - bicycle storage and changing roomsposted by Susan M. Kaplan on Oct 25, 2010, 6:02 pm
We're working on a project in a building in which the client is already occupying several floors. They have bike storage on the ground floor dedicated solely to employees of the company (but not... Last reply: Susan M. Kaplan, Nov 1, 2010, 10:27 am |