The requirements state that for all zones: "Illuminance generated from a single luminaire placed at the intersection of a private vehicular driveway and public roadway accessing the site is allowed

We are building a healthcare project and have registered our project as LEED for NC. We have a question concerning exterior lighting.

Hi all! Our project is a zero lot project adjacent to a public walkway.The municipality will not provide any street lighting for the public walkway.

My project is located in an industrial zone, entitled as Urban Area with Priority Densification.

The contractor on a LEED site would like to put a billboard up.

I'm working on a project in Mexico and I would like to know the maximum light power density allowed on a soccer field.

Similar to the other "Interior Lighting for 24 operation" questions, I am working on a smaller (8,700 sf) fire station that is operational 24/7.

Hi, My project will install an exterior viedo wall. May I know if this feature shall included in the calculation?

http://www.leeduser.com/comment/redirect/24547 Per GBCI, the Leed Reviewers are allowed to request a vertical calc grid if they are concerned about an area of the site.

The electrical engineer on our project filled out the template sheet that I downloaded for this credit.