Forum quick links
CO Sensors in Multi-Family Highrise
NC-v4 EQp1:Minimum indoor air quality performanceposted by Jennifer Rennick on
For a Multi-Fam Highrise, the corridors will be heated with a ducted roof-top gas furnace split dx system will be installed.
Campus Credit - Landscape
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by SAMY Chamy on
Our Project is a Campus Project with 4 registered buildings for LEED. The ground cover landscape didn't not meet the SS C5.1 requirement. So we opted for Roof Garden on one of the buildings.
Building with no FTE
NC-v4 LTc6:Bicycle facilitiesposted by Nathan Gauthier on
Has anybody proposed eliminating showers and / or long-term bike storage in a building with no FTE? We're renovating a small wood-frame classroom building with 8 classrooms.
Is there a limit to how many products can use the same CSR?
NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by Alexa Stone on
An industry-wide (generic) EPD can be used for up to 10 products listed within the industry-wide EPD, provided that each application has separately reported impacts within the EPD.
Criterion valuation factor
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by soha yamani on
what is Criterion valuation factor ? it is mentioned in the calculation part Equation 2 for option 2 of this credit in the reference Guide p.
FAHU's Fan power and Cooling capacities
CS-2009 EAc1:Optimize Energy Performanceposted by Manivel Natarajan on
Hi All, In my project, proposed building has DX split unit HVAC System.
Natural Ventilation Loads Modeling
NC-2009 EAp2:Minimum Energy Performanceposted by Sefa Sahin on
Dear All, We are working on residential building in Istanbul/Turkey. The building is heated and cooled by radiators and split AC respectively.
Between LEED v4 BD+C:NC or LEED v4 ID+C: CI
posted by Edgar Arevalo on
This may be a silly question, but I ask in order for some clarification. I have a particular question using the 40/60 rule.
LEED v2009 CS+ID Point
CS-2009 IDc1:Innovation in Designposted by Britt Valdez on
In seeking IDc1 Innovation and Design point for LEED CS v2009, would the purchase of carbon offsets to reduce natural gas emissions be acceptable in achieving the ID point?
Distric Energy System
NC-2009 EAp2:Minimum Energy Performanceposted by Gina Dederer on
Dear all, Currently we are working on an industrial facility pursuing LEED 2009 NC – Major Renovation certification. The building consists of 3 levels.