Hello all,
Our current core&shell project does not include sanitary installations, which will only be built at tenant fit-out stage. LOv3 for core&shell produces generic data based...

We have two lavatories to be used for medical purposes in our buldings: one in the esterelization room of an ambulatory and the other in a medical office. However, those two lavatories are of the...

I have a fixture usage group with 4 FTEs and there's a shower in it. Shower daily uses is 0.1, so the template calculates my total daly uses as 0.1 x 4 = 0.4 and it rounds down to 0. Therefore,...

We are using 3/6 LPF dual flush toilets in both male and female restrooms. The WEp1 template doesn't allow us to input both rates, so in my understanding we have to input an average. However, if...

Our project has entirely separated bathrooms for people with disabilities with flow and flush fixtures consumption different from the ones of the conventional bathjrooms.
How can I estimate...

comments Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11474 thumbs up July 5, 2012- 10:08 pm Similar questions have come up on this forum in the past, and I have always...

LEED NC 2009 says in p.170 "In buildings with multiple shifts, use the number of FTEs from all shifts". We have a 24hs building, with 4 shifts, some of them overlap. I'm not 100% cleared of what...

Hi, I need help with my first process water calculation. On LEED Online: What does “ADO” mean? Could it be “Annual Days of Operation” maybe?
And if you enter that you have water cooled ice...

We recently completed a new building where we used American Standard Cadet FloWise pressure-assisted 1.1 gpf toilets. The problem is that these toilets do not work properly. Since the moment...

Hi all, I was surprised to receive a recent review comment for WEp1 noting that we had left out the janitor sink faucet in our calcs. As noted in LEEDUser and elsewhere, janitor sinks are not...