The project is located within a building, its area is less than 75% of the total area of the building. The project has a chiller plant that only supplies the project area.

Bearing in mind...

If a client owns all of the interior space, then I assume that they would obtain this credit, since they pay all of their energy and water bills. Would I be correct?

LI #10418 allows LEED-NC v2009 projects to meeting the M&V credit by meeting LEED v4 enhanced...

Does the cold water feed to tenant spaces need to be metered for this credit. Cold water consumption does not feature in the energy model.

I'm working on a LEED-CI project occupying 100% of the tenant space. The project is complying with appropriate zoning and controls for EAc1.3 and therefore not doing an energy model, making them...

Does anyone know if the Exemplary Performance option for BD+C given for sharing energy data via a Third-party template is available for ID+C? I haven't seen anything about it either way.

...

I am trying to think through an alternative compliance. Please humor me.
So I am working on a building where the tenant owns and occupies the entire building. They are renovating 2 entire...

Our tenant will have sub-meters installed on the lighting and HVAC electrical panels on each floor of their tenant space. They will not however pay their electrical bill directly they will have a...

Our TI project is 4 floors of a large building, so

Hello,
We are working on a low-rise office building and pursuing LEED CS v2009 for the base-building and LEED CI v2009 for at least one of the tenant spaces. These are separate projects...