My project is the new construction of a 3,000 s.f. bus depot in a small city. Part of the space will be leased to a retailer at a later date, most likely a convenience store or coffee shop.

Hello - the site I'm looking at already has under 25% turf area. In fact it has no turf, only vegetation.

I recently received a Design Review comment advising that the IAQ procedure included in Chapter 6 of the ASHRAE 62.1-2007 is not an acceptable tool to demonstrate compliance.

The LEED NC-Retail v2009 credit 4.3 and 4.4 to provide preferred parking for LEV/FE vehicles and Carpools appears to require that the project identify employee parking separate from customer parkin

All, We submitted a dormitory project for a university in which there was a very substantial amount of existing parking between our new building and another part of our project (a new, relatively

We are performing a 2009 Commercial Interior for the reuse of a 7000 sq ft decommissioned Army base building. In the demolition phase, we collected old ceiling tiles to return to the manufacturer.

We are working on a project where we are the sole tenant in the building. Can we use the whole building meters for our MPR6 reporting if there is no other user in the building?

Is there any criteria as far as what a View Preserving Shade actually is? There are openness factors as low as 1%; yes, you can see through them, but not much.

We have an office core/shell project that we are considering for certification. The Owner may want to just design a small mechanical unit to service the restrooms and not much more.

We are trying to figure out how to translate our ITE calcs properly for an elementary school project.