Forum quick links
Tab 6-1 and 6-4
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
Art classrooms are considered both in Tab. 6-1 and in Tab. 6-4. If we respect Tab. 6-4, could we avoid the verification of Tab. 6-1 (i.e. could we avoid the outdoor air supply)?
consumption and demand
NC-v4 EAc3:Advanced energy meteringposted by Francesco Passerini on
Does "Electricity meters must record both consumption and demand" mean that both kWh and instantaneous kW must be recorded?
Leed boundary for commercial interior
CI-2009 PIf1:Minimum Program Requirementsposted by Elena Gonzi on
Hi, I have some question about LEED Commercial Interior certification : 1) Situation: we have a offices building that has a basement in common with other two offices buildings.
residential/nonresidential
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
Exception a. of G3.1.1 states: "Use additional system type(s) for non predominant conditions (i.e. residential/nonresidential …)".
Existing Equipment
NC-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
The 90.1-2010 User's Manual states: "In some cases, a complete HVAC system already exists (...) the proposed building and baseline building models are the same and are based on the existing HVAC sy
Humidification in system 7
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
The design model has an AHU that supplies air for some zones. During the winter season the AHU humidifies the air through an atomising humidifier.
pressure drop adjustment System 1
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
Can the pressure drop adjustment (e.g. for fully ducted return or for particulate filtration MERV) be applied to System 1?
storage of rain water
NC-v4 WEp1:Outdoor water use reductionposted by Francesco Passerini on
Does the storage of rain water contribute to achieve this prerequisite? The project will irrigate the outdoor vegetation only with rain water.
EN 13779–2007
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
We are deciding between the use of EN 15251 and the use of ASHRAE 62.1. Do you have experience in applying EN 13779–2007?
Building Area Method - highlighting merchandise
CS-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
For a building I have to use the Building Area Method (ASHRAE 90.1-2007, 9.5.1) because some calculations were already developed through that method and now changing the method would be complicated