Forum quick links
Fog Installation on the rooftop
NC-v4 WEc1:Outdoor water use reductionposted by Christoph Keck on
Hi,
our project has a fog installation on it´s rooftop.
The water consumption of said installation would be 3,6 l/min.
Credit: Grid Harmonization
posted by Stephan Zweig on
Dear Leed User,
I have a question about the Grid Harmonization Credit:
If there is no Demand Response program available could I choose for my project Case 3?
Limits for VOC content outside US, additional questions
CS-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by Ernst Schriefl on
All the limits on VOC content provided in the LEED reference guide (2009 edition) are minus water (g/L minus water or g/L less water).
Submitting a credit during the review process which was not submitted at first application
posted by Ernst Schriefl on
I have a general question regarding the review process:
Say, you have already submitted a certain amount of credits for review and received a preliminary review.
Are Parking areas for Buses and Taxis included in Option 2
NC-v4 SSc5:Heat island reductionposted by Stephan Zweig on
Hello to all,
Do you have any suggestion if I have to include for Option 2 of heat island reduction credit the following:
1) Parking lots for Buses?
Sound transmission - STC Rating - Specify
NC-v4 EQc9:Acoustic performanceposted by Stephan Zweig on
Hello Leed User community,
I am looking at the acoustic performance tool for LEED v4.
Sewage treatment plant used as alternative water source
NC-v4 WEc2:Indoor water use reductionposted by Stephan Zweig on
Hello to all,
My building uses water for the toilets and for the irrigation from a municipally sewage treatment plan with biological treatment.
Documents - which Language?
posted by Ernst Schriefl on
Hi,
This is maybe an obvious question but our projects are located in Austria. Therefore most of our documents are in German.
CSI MasterFormat necessary in Europe
NC-2009 MRc5:Regional materialsposted by Paul Deinhofer on
Hello Is it also necessary for projects in Europe to evaluate the material costs using the CSI MasterFormat? Or is there another possibility...? Thanks