Forum quick links
return fan for PTAC
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
G3.1.2.8 states: "If return or relief fans are specified in the proposed design, the baseline building design shall be also be modeled with fans serving the same functions (...)".
VOCs and regularly occupied spaces
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Artur Garcia on
Hi, i'm working in a project of a refrigerated warehouse where most of the surface is not a regularly occupied space.
Tab 6-1 and 6-4
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
Art classrooms are considered both in Tab. 6-1 and in Tab. 6-4. If we respect Tab. 6-4, could we avoid the verification of Tab. 6-1 (i.e. could we avoid the outdoor air supply)?
Roof area exempt from the SSc7.2 calculation
NC-2009 SSc7.2:Heat Island Effect—Roofposted by FABIO VIERO on
We have a project with a terrace that is about 50% of the building roof.
UNITS FOR SIMULTANEOUS&INDEPENDENT PRODUCTION OF HOT&COLD Water
CS-v4 EAp2:Minimum energy performanceposted by Giuseppina Amorusi on
Hi all, I'm modeling an HVAC system in Design Builder + Energy Plus that consists in Air handling units and VRV system.
Negative value of Monthly Landscape water requirement?
NC-v4 WEp1:Outdoor water use reductionposted by Francesco Passerini on
Dear all, I am performing the calculation for the Water Outdoor Prerequisite, with both excel for a Project located in Italy (Rome): 1. Water budget tool (downloaded from EPA) 2.
Transfer Air for IEQp1 achievement
CI-2009 IEQp1:Minimum IAQ Performanceposted by Ricardo Sá on
Hello, I'm currently working on a project of a huge supermarket. The building has warehouses and storage rooms.
Lead-free waterproofing floor slabs
Healthcare-v2009 MRc4.2:PBT source reduction - lead, cadmium and copperposted by VICTOR MORENO on
In LEED Healthcare Reference Guide specifies lead-free roofing and flashing. Is applicable the lead-free for PVC waterproofing floor slabs? I understand that roofing is for roof solutions, no sl
Multi-purpose unit for 4-pipe systems
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
I'm considering a "Multi-purpose indoor unit for use in 4-pipe systems for the simultaneous production of chilled and hot water by means of two independent water circuits".
Group or single project?
posted by David Lazaro on
Hello, We are pursuing LEED EBOM v2009 for an office complex. The project was built at the same time and has two twin buildings, with independent HVAC systems.