Can a different CxA for a project Construction Phase be hired other than the one hired during Design Phase ?

Been awhile since this thread has been used. This has come up on a project and we lost on appeal so I'm sharing this information with everyone. Any area being claimed in the wattage baseline calc

I could have sworn I saw a link somewhere in LEEDUser to a list of approved programs to use for this credit (that also gets updated as USGBC adds more programs), but can't find it now. Did I imagin

I have a sub that just submitted documentation for Particle board that is "Third party certified (California ARB approve TPC-1) to comply with CCR 93120.2 (CARB Composite Wood ATCM).

Hi We are currently busy with LEED documentation of a manufacturing facility that is under operation for a year now.

If there is an open space with (1) a ground-mounted solar PV array and (2) native plantings or adapted vegetation beneath the PV panels and around them so as not to block sunlight, would the area b

Hi all, I'm preparing to register a new project (new stadium) and would like to double check that it is a 'single building'.

We have a 31 storey office tower under construction and slated for substantial in October 2017. It was designed and construction started without any confirmed tenants.

The EPA has issued the 2017 Construction General Permit (see web page https://www.epa.gov/npdes/stormwater-discharges-construction-activities-2017-cgp) that became effective on February 16, 2017.

Greetings, I am currently researching the LEED methodology for calculating a water use/efficiency baseline for the housing sector. Any links or advice would be greatly appreciated. Regards.