Can LEED V.4 C&S projects use the same Alternative Compliance Path (ACP) provisioned for LEED V.3 C&S projects as outlined in the link below?

I've seen previous versions of this question on the forum and the typical answer is to look at design information provided by diffuser manufacturers. As others have replied back, the standard is to

Looking to confirm: We are using subgrade Fill for our building project that was procured from an on-site location.

We provided a sample floor plan of future tenant area to document this credit.

My team has a unique project (I suppose most are) - part of it is a cheese processing facility.

Hi, Is there any limitations in LEED V4 regarding process energy that it should be minimum 25% (In proposed case) of the baseline energy cost for the building.

For multifamily buildings where the residents are responsible for purchasing and installing fixtures, for Option 1 do I need to survey every fixture in every apartment?

Forgive me if this was covered elsewhere but I couldn't find it.

We're doing a project that is >75% of the interior of the building (nearly all of it), but is considered CI.

If we have a ceramic tile wall, do we count the EPD's (if we could get them) for the Tile separate from the Thinset and the Grout, or would all three products be considered as 1 EPD?