Hi, Initial design review has just been returned for our project.

Having built a cafeteria at a local University we are having trouble getting the Q (tons ) for some of the refrigerated display equipment.

Dear All We have two projects that are attempting LEED 2009 NC Certification the first one is office building with server room and the second one is Arg Gallery.

Sorry if this is a rudimentary for all you LEED guru's out there, but I am hoping you can clarify the question I have on a number of items we are specifying for our first LEED project We are speci

We had a CI project returned without approval for SSc1 paths 7 and 8. It is a school project, an addition, and the owner did not install any irrigation systems.

I used a duct sealant with VOC = 49 g/l and I am not sure if it complies with IEQ credit 4.1, because I do not know in which category it falls in the table.

My project has a 6,500sf office space serving a 207,000sf warehouse/distribution center (213,500sf total area).

Hi, I am modeling a laboratory which has a small area of office space for LEED and wanted to check a couple of approaches: 1) The engineers have informed me that the lab has to be a once through sy

Can anyone advise how I should go about running the energy model for a building whose supply air & outside air quantities are being driven not by actual load, but by Unified facilities Criteria

If we convert district steam to hot water for space heating, is there any guideline on the efficiency (of heat exchanger) for baseline model?