Hi, I am wondering what Baseline System Type should be used for hotels?

Our current project will have a rainwater containment system that will be connected to our domestic water supply to provide water for toilet flushing and irrigation.

I am working on a project that is pursuing both Monitoring-based Commissioning and Building Envelope Commissioning.

I've recieved comments on a past project that said all square footages must be consistent throughout the project - so the SF documented in MPR 2 must be the same as EAp2 and WEp1. I'm working on a

To calculate the virtual rate, DES v2 option 1 2.4.2.1 gives the equation of $/MBTU of hot water = 1.59*$/MBTU fuel + 3 * $/kWh electricity. This would gives me a really big number.

The client of an commercial interiors project location wants to avoid the use of motorized dampers where possible.

What do I do with the snow and ice removal activity during the performance period if we don't get any snow? It appears the requirement is 20% compliance in each operational area.

Has anyone seen a floorscore for wood wall base? We have awood wallbase that is manufactured by the millwork contractor.

A five story Atrium is being constructed in a science building. It is also the main entry into the building and furnished with benches for transient use.

For option 3, do measurements have to be taken more than once?