We are bidding on a job where the large curtainwall are being assembled at a joint vernture's headquarters that is within 500 miles of the job site. Can the cost of the fabrication labor be...

We are finding that some manufacturers of products that contain several raw materials or proprietary sources of materials are not providing a breakdown of specific...

We have a LEED submittal from a major manufacturer that indicates the location of extraction of adhesive raw materials is 244 miles from project site. When a major manufacturer documents this as...

Dear All,

Option 2 of this credit requires that parking shading surfaces must have minimum...

My office had a bunch of file cabinets repainted. A industrial coating was used. I have the...

Currently working on a project where a 100,000sq.ft. PEMB is being demolished down to the steel...

There will be no smoking in our buildings (DoD requirement); we will have smoking allowed outside the 25' perimeter outdoors. As such, would it violate the requirements of IEQp2 to have smoking...

my client has existing pest management control policies but not as detailed as in the attached template (specific means of treating each pest - from ants, rodents, etc). will this be acceptable...

I was wondering when writing the cleaning policy do you include products and/or equipment that are used at the site in the approved product/equipment list even if they do not meet any of the...

Few of the pesticides used by our client do not have an EPA registration number but fall under WHO class III pesticides.Is it mandatory to put the EPA registration number in the log.Please advise...