Our project is located in Kathmandu, Nepal and I have a few questions regarding the following points. 1.

Does LEED specify a required number of commissioning inspections during construction? We are trying to develop a scope based on the minimum requirements of LEED.

We are working with a property that will be undergoing facilty alterations and additions in the parking garage. The property will be adding a small office in their parking garage.

The ANSI S12.60-2002 standard requires that core learning spaces, between 10,000 and 20,000 cubic feet, have reverberation times that do not exceed .7 seconds.

IEQ p3 is a requirement of LEED for Schools 2009.

For those of you that use Trace 700 and are familiar with the fairly new feature, the "LEED Energy Performance Summary Report", that Provides all the information for each section of the EAp2 templa

Is the tonnage requirement for the credit supposed to include compressor capacity only or can additional capacity from energy recovery devices be included in the tonnage?

We are working in a project inside a national park. The site used to be occuppied by a fuel station that was demolished and abated 12 years ago.

Dear all, We received the Design Final Review for our project, and a total of 7 credits were denied. 1) If we have initially provided documentation which has not been interpreted correctly by the

We are designing a standalone auditorium addition to an existing high school facility using LEED 2009. We are not disturbing or renovating any of the existing school facility.