Tristan Roberts
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Existing Finish
CI-2009 MRc1.2:Building Reuse—Maintain Existing Interior Nonstructural Elementsposted by Sara Neff on
I looked through the reference guide for a definition of 'finished,' but I couldn't find one, so I'm hoping someone here can help: I have a CI project that is moving into a space that has existing
2
Sun Sep 25, 2011, 10:05 am
O&M Manual is the bible
General forums
posted by Bazeeth Ahamed Khader Mohamed Ali on
I have taken the exam in Feb 2011 and passed with 187. There are no short cuts. Get familize with the reference manual. Practice questions from GBES or Ever Blue may help you more
2
LEEDuser Basic Member
0 thumbs up
Sat Sep 24, 2011, 9:52 am
8
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Sep 23, 2011, 1:23 pm
Private lavatory faucet
CI-2009 WEp1:Water Use Reduction—20% Reductionposted by Sundararaj Subburaman on
Hi, We have a project that consists of an office space, a laboratory, and a salon area for testing health care products.
2
Integrated Design & LEED Specialist
SERA Architects
LEEDuser Expert
1361 thumbs up
Fri Sep 23, 2011, 5:05 am
2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Thu Sep 22, 2011, 10:11 pm
3
Director - Green Building Advisory
Colliers International Ltd.
LEEDuser Basic Member
201 thumbs up
Thu Sep 22, 2011, 3:24 pm
3
Principal, Architect
Verde Concepts
LEEDuser Basic Member
34 thumbs up
Wed Sep 21, 2011, 6:22 pm
rating system and credit
General forums
posted by Tristan Roberts on
Hi Christopher, can you ground this discussion in a specific LEED rating system and credit? I am not sure if there is a Homes vs.
2
GBWorks
LEEDuser Basic Member
8 thumbs up
Wed Sep 21, 2011, 3:30 pm
Too much Window Area (WA)?
Schools-2009 IEQc8.1:Daylight and Views—Daylightposted by Rebecca Griffith on
Is it possible to have too much window area, therefore disqualifying a room from being included in the total daylit area?
12
b.i.g. Bechtold DesignBuilder Expert
LEEDuser Basic Member
581 thumbs up
Wed Sep 21, 2011, 12:51 pm
LEED 2009 for New Construct, Optimize Energy Perform - EA CR 1
NC-2009 EAc1:Optimize Energy Performanceposted by John Harrington on
I have two buidings on the same site/project boundry. Do I model the two buildings as one building?
2
LEED AP, BD+C
LEEDuser Basic Member
44 thumbs up
Mon Sep 19, 2011, 8:40 pm