Forum quick links
LEED Online IEQc7.1-2
CI-2009 IEQc7.1:Thermal Comfort—Designposted by Kasandra Martin on
It asks to upload--"Upload IEQc7.1-2. Provide supporting documentation.
I agree Tristan!
posted by Scott Bowman on
Perhaps we LEEDuser members can show our support of this concept through agreeing with Tristans open letter. This kind of information can help us understand what works and what does not.
LEED -NC 2009 for Retail, MRp1
Retail-NC-v2009 MRp1:Storage and collection of recyclablesposted by SHEILA MORALES on
If we have a (supermarket) store in a remote location that is not within the service area of an organic waste recycler (such as a commercial composter), and organic waste is shown by a waste estima
Review comments on widow U-value
NC-2009 EAp2:Minimum Energy Performanceposted by Chris Miller on
We received the following review comments during our design review and my question is, where do I find the Uvalue for the frame & glass assembly mentioned in their comments(this is a storefront
Adhesive for Thermal insulation material
NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealantsposted by Valentin Grimaud on
The adhesive used for cohering thermal insulation material of piping (like Armacell) should be included in which category of LEED?
Certified wood requirements
CS-2009 MRc6:Certified Woodposted by Whysal Haddad on
I am a contractor and all the doors we use have the FSC and COC certificates, my question do we have to have both FSC and COC certificates to get the creidt or FSC certifcate alone will be fine ?
Can A project Team Perform that credit
Schools-2009 SSp2:Environmental Site Assessmentposted by soha yamani on
I'm Having the same problem in a project in Egypt , as Ministry of Environment only provide Environmental Impact Assessment which is totally different from Environmental site assessment , and i cou
IEQp1 online form
CI-2009 IEQp1:Minimum IAQ Performanceposted by Kasandra Martin on
I have input my info but it is not complying with IEQc2. Do the uploaded forms need to be pre-approved before it will comply? Also do I need to fill out the Appendix?
Separate green roofs, separate systems
CS-2009 WEc1:Water Efficient Landscapingposted by Monica Alicea on
Hi, If there are two areas in the building that will be irrigated by two separate systems, how can this be taken into acount in the LEED template to calculate if 100% potable water is being saved?
LEED NCv3 Project Boundary in 3 Dimensions
Healthcare-v2009 MPR3:Must use a reasonable site boundaryposted by Sara Goenner Curlee on
Hello, I am reposting this question, hoping to get a response. It was under PIf2, but maybe this is the better area to post it.