For Miami-Dade County, FL.

In the SSc6 form, where do I find the "Mitigated design rainfall volume for the entire site (cu ft)?  In the building 

plans?  Where in the building plans...

When using the same input data in both forms (IP and SI units) someone should expect the same result (percentage mitigated). The online form with SI units gives a negative percentage mitigated...

I am having the same problem with the online form and pdf for ssc6. Has anyone figured this out?

Past conversations have said that the volume stored in the soil mix and the dead storage above the soil mix (below the overflow) in bio-retention basins can be used to offset the runoff volume...

Does anyone have an accurate way of converting total inches of rainfall to cubic feet as required by the credit?

Are there any requirements on who must perform the Stormwater system inspection for LEED

OK it seems like, from reading the questions and responses here, that there is absolutely no clear guidance on how to come up with the "rainfall interval event" in order to perform the drawdown...

Both uploads SSc6-3 and SSc6-4 require the provision of “a copy of the most recent stormwater inspection and a log showing that any needed maintenance or repairs were performed within 60 days of...

Hello there. My team and I are certifying a building in Brazilia, Brazil. I would like to check if I'm right about the procedure to accomplish SSc6.

1) Find the average weather year...

My site has no stormwater management facilities. It is surrounded by natural vegetation/open space, and parts of the land has hills. (A reservoir is located close to the hills.) The ratio of open...