If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time. Basically what I am getting at is that if at 9am 80 percent of the...

Hello,

I am documenting this credit using the simulation method. For many of the regularly occupied spaces, the rooms are above the 10fc requirement except for a small corner of the room...

Hello,

Where would I find the Supplemental Daylight and Views Calculation Spreadsheet for v2009 (LEED Online states it's "found under 'Credit Resources'")?

Thank you.

Can anyone confirm if the in-house plugin for Revit 2015 will be accepted for IEQc8.1 simulation?

Hi Every one,

Currently we are working for factory building project which has registered five months before under USGBC Rating system LEED 2009. We would like to get Daylighting credit and...

I know that glare control is a requirement for each window. The reference manual gives a list of these to be: fixed exteror shading devices, light shelves, interior blinds and louvres, fritted...

When working on leedonline for this credit, we are told to Download, complete and upload the Supplemental Daylight and
Views Calculation Spreadsheet (found under "Credit Resources").
...

Although the October 2013 Matrix, does not allow any patient rooms to be without daylighting/ views, I believe these rooms could be eliminated due to the nature of their process. Has anyone dealt...

Are rolling shades mandatory when doing the prescriptive method?

Should an area designated for hot desking be included as a regularly occupied area? No single user will spend more than one hour per day at these workstations.