| Topic | Recent |
|---|---|
Paint on the inside of pipesNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Emmanuel Pauwels on Apr 3, 2012, 6:39 am
Our project has a district heating and cooling system. The inside of the pipes that connect the building with the district heating and cooling system have a paint. Does that paint fall inside the... Last reply: Mara Baum, Apr 3, 2012, 12:17 pm |
|
Parking Lot CoatingsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Charles Fritzemeier on Mar 20, 2012, 7:22 pm
Where do parking lot coatings come in? Last reply: Devon Bertram, Mar 20, 2012, 7:28 pm |
|
Reduced / Unreduced VOC ValuesNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Maya Karkour on Mar 15, 2012, 4:21 am
Dear all, I received a material datasheet for anti-corrosive paints. I noticed the following: Last reply: Mara Baum, Mar 16, 2012, 12:11 pm |
|
IdeaPaint and other "process" paintsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Harvard University Green Building Services on Jul 6, 2011, 2:29 pm
I'm working on a project that is considering using Glidden's IdeaPaint product that is a paint that turns any surface into a dry-erase board. It has a 220 g/l... Last reply: Nelina Loiselle, Feb 23, 2012, 11:02 am |
|
fireproof coatingsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Michele Helou on Jan 14, 2012, 1:40 pm
does anybody out there know if Fireproof coatings for steel are covered under EQc4.2 and how are they classified? Last reply: Maya Karkour, Feb 21, 2012, 3:09 am |
|
Anti-corrosive paints for sprinkler system and heating-coolingNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Alicja Bieszyńska on Feb 16, 2012, 9:26 am
Does anyone know if IEQ c4.2 credit also applies to anti-corrosive and anti-rust paints/primers for sprinkler system or heating-cooling instalations? Those pipes are located in the... Last reply: Alicja Bieszyńska, Feb 21, 2012, 1:26 am |
|
Non-fibrated aluminum paintNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Bruce Maine on Feb 13, 2012, 1:07 pm
This is actually a LEED for Healthcare question dealing with exterior applied products. In several roofing sections we ask for "non-fibrated aluminum paint". It seems as through 1113 (which just... Last reply: Tristan Roberts, Feb 21, 2012, 12:35 am |
|
Paint Stripper?NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Ellen Mitchell on Feb 20, 2012, 9:16 am
I have a contractor submittal asking if paint stripper/ remover should be included in this credit and I'm not sure how to answer. In reviewing the credit requirements and... Last reply: Ellen Mitchell, Feb 20, 2012, 12:18 pm |
|
paint pasteNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Dario Ibarguengoitia on Feb 7, 2012, 5:13 pm
Which category should paint paste fall under? Last reply: Mara Baum, Feb 20, 2012, 12:00 pm |
|
Aerosol Coating Product (Spray Paint?)NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by John-David Hutchison, LEED AP BD+C, PMP on Feb 10, 2012, 2:41 pm
Has anyone found a definitive limit for spray paint - contractors often wonder what to use for marking paints. Last reply: Mara Baum, Feb 20, 2012, 11:50 am |
