Hello, I have some experiences with energy modelling in eQuest, but I would like to change my software to something else. I need to advise, which of following software I can use for LEED...

We are currently working on a industrial building where the owner has a plan to lease out the...

In an EAp2 appeal we were denied a 87 % cooling energy saving. The reviewer consider it unlighty to have cooling demand during winter during unoccupied hours. However, the Baseline system shall...

Does anyone try to use the energy output from the simulation software and claim EAc6 emission reduction report of LEED EB:OM and get innovation credit (innovation path) since the output of...

The LEED 2009 v does not specify the level of efficiency for a small office / mixed use building. Only AEDG 2004 is shown specified. This is a 30% reduction , however, ASHRAE refers to 90.1-...

I have project that is purchasing chilled water from the local utility. Is it allowed to follow the "Treatment of District or Campus Thermal Energy in LEED V2 and LEED 2009" document following...

Core performance path

We plan go for the option 3 the core performance

1 For Section 2.9 equipment efficiency, We have 500,000+...

I’m modelling a school in which a conference room is going to be placed. The baseline shall be System 5 - Packaged...

I'm modeling a baseline model (System 5) and I have to apply G3.1.3.13 of ASHRAE 90.1-2007: "Minimum volume setpoints for...

We are working on a project where the total project has five towers on one podium. We are certifying only one tower for LEED-NC with an area of 34152 sq.m. and hence the baseline system as per...