Log in
Forum » NC-2009 EAp2
Topic

Side Lighting- Clerestory

NC-2009 EAp2: Minimum Energy Performance
posted by Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C on Jul 12, 2019, 8:58 am

Hello everyone, happy Friday!

Should a Clerestory Side-light be considered a window? Not sure why am thinking it could be considered as a Skylight but thought to confirm anyway. Thank you...

Last reply: Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C, Jul 12, 2019, 2:06 pm

Exhaust not interlocked with HVAC

NC-2009 EAp2: Minimum Energy Performance
posted by Jorge Lopez de Obeso on Nov 14, 2018, 11:38 am

Hello, we have this residential project were the HVAC system is as follows:

Baseline: System 2 - PTHP

Proposed: Mini Split System

The thing here is that, as known,...

Last reply: deuisi cromversa, Jul 10, 2019, 4:43 pm

EnergyPlus building geometry Errors

NC-2009 EAp2: Minimum Energy Performance
posted by Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C on Jul 5, 2019, 1:35 pm

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up July 8, 2019- 2:57 pm These forums are generally no the best for getting answers related to specific software issues. I would try the EnergyPlus help desk or maybe the forums on this page-  http://energy-models.com/   Log in or register to post comments Cory Duggin Senior Energy Wizard TLC Engineering Solutions LEEDuser Premium Member 53 thumbs up July 8, 2019- 4:26 pm https://unmethours.com/questions/  has a lot of EnergyPlus users answering questions too. Log in or register to post comments Fatou Jabbie,...

Last reply: Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C, Jul 9, 2019, 10:00 am

ENERGY STAR certified washer/dryer combos?

NC-2009 EAp2: Minimum Energy Performance
posted by Danielle Waters on Jul 8, 2019, 3:00 pm

If ENERGY STAR does not have a certification for dryers or washer/dryer combos, are combos excluded from the prerequisite? 

Last reply: Waleed AlGhamdi, Jul 8, 2019, 3:44 pm

Minimum Energy Performance Calculator – Performance Outputs tab

NC-2009 EAp2: Minimum Energy Performance
posted by Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C on Jul 5, 2019, 2:00 pm

AlGhamdi Sustainability Enabler Eskew+Dumez+Ripple LEEDuser Basic Member 20 thumbs up July 8, 2019- 2:48 pm Sorry, I should have seen in which forum this was posted:) Log in or register to post comments ...

Last reply: Waleed AlGhamdi, Jul 8, 2019, 2:48 pm

Modeling Electric Heaters

NC-2009 EAp2: Minimum Energy Performance
posted by Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C on Jun 26, 2019, 1:27 pm

Hi,

 I'd like advice on the best approach to model Electric Heaters for stairways, vestibules, gas and water meter room.  We two types of e-heaters 1) with a built in single pole...

Last reply: Fatou Jabbie, | Technology | Design and Engineering Plan Reviews | Energy Code Compliance | Sustainability | LEED AP BD+C, Jun 27, 2019, 12:46 pm

Minimum Energy Performance Calculator – Performance Outputs tab

NC-2009 EAp2: Minimum Energy Performance
posted by Vassil Vassilev on Jun 17, 2019, 9:09 am

Greetings,

In the project we are modeling, there are On-site...

Last reply: Jean Marais, Jun 19, 2019, 3:52 am

Selecting the HVAC system

NC-2009 EAp2: Minimum Energy Performance
posted by Madushan Samarakoon on May 15, 2019, 6:29 am

Hi there,

I am working in a LEED project of a 12-story (2 are below ground car parks) City Hotel project with approx. 12000 sqft per floor.

I have selected Baseline HVAC system as...

Last reply: Madushan Samarakoon , May 15, 2019, 11:26 pm

Building Area Method and System designation

NC-2009 EAp2: Minimum Energy Performance
posted by Jorge Lopez de Obeso on Mar 15, 2019, 1:30 pm

Hello everyone, I have a project with the following conditioned area categorization.

1st to 5h Floor are composed by:

Assembly areas: 59,232 sq ft (considering hotel service areas...

Last reply: Jorge Lopez de Obeso, Mar 19, 2019, 3:20 pm

Building Area Method and System designation

NC-2009 EAp2: Minimum Energy Performance
posted by Jorge Lopez de Obeso on Mar 15, 2019, 3:51 pm

Hello everyone, I have a project with the following conditioned area categorization.

1st to 5h Floor are composed by:

Assembly areas: 59,232 sq ft (considering hotel service areas...