In a recent LEED project, we face problems while setting up energy model for a complex design, in which there are 7 smal buildings based on a large underground garge. However, they are applied as...

What path should I take if a project is a Campus with 6 or more Residential Buildings with 3 floors each. This is because in ASHRAE 90.1 - 2007 the Low Rise residential buildings are out of the...

I could both very general and very specific guidance on modeling a mixed-use project - with first floor retails space that is "shell" only (tenant build-out is not included in the project) and...

Dear All,

Our current project is an existing building renovation, where boiler and chiller in the 2 pipe fan coil system are retained, but the fan coil units are replaced with new ones....

Hello,

Assuming we are using Option 2 - Prescriptive compliance Path, the roof skylight of our project would need to abide with the...

We are working on the LEED design of a factory building. We are running an energy simulation: for the size of the building, according HVAC modeling requirements in ASHRAE 90.1, we would use...

Hi,
we are working on LEED Silver project in Abu Dhabi as MEP contractor. our project is supplied chilled water from other party. it is told to us by client that while procuring the...