Hello all,

I am using LEED v4 with Environmental Product Declaration (EPD) things. 

Hello - I am working on a project where the subcontractor has requested we approved a product that uses a WBP Phenolic Formaldehyde binder.

We have a project which has an big roof top lounge served by RTU, the same unit serve adjacent corridor & storages so this is basically an single zone system with no VAV terminal boxes, so whil

Is it okey to provide VOC values according to EU standards at 250 ° C? What does g/L less water means?

I am working on a cold storage project going for LEED certification , I am not able to understand the modelling procedure for the refrigerated spaces in eQuest.

All, 

I am currently working on a office facility/building. When i tried to do the LPD calculation for Energy simulation. I came across few doubts listed below.

Will the Use of Rainwater recharge pits comply with the credit requirement?

How to answer the following requirement in the IEQp1 form when you already filled the Minimum IEQ perfromance calculator with all occupiable zones in it and it has already automatically selected th

Do I understand correctly from 90.1 Table G3.1 item 5f for baseline building that I can input the existing envelope conditions in the baseline model in lieu of the 90.1 minimum envelope requiremen