Hi all,

What level of detail do you generally use for completing the space usage type table? Do you write down room by room? Do you bundle up rooms by floor? Do you bundle up rooms by type...

According to Interpretation #10209, issued 7/1/2012, it says that if a non-residential SF of a mixed-used building is less than 10% or no greater than 5,000 SF, it is acceptable for the non-...

We are currently close to finishing all credit requirements. Do you recomend to submitt al information for review as it is completed or wait to have all ready and submitting it all at once?

I am starting to fill out the paperwork for a new LEED ID+C project for which my LEED Project Boundary will be the full floor of an office building. My client owns the floor, as this is a condo...

We are currently working in the design of an iconic building that has 2 layers of facade. The exterior shell is just fins that runs around the main environmental envelope but away "10 Meters"...

We have parking spaces in the first floor of our building, for tenants of the project space. The square footage of the parking is not included in the project Gross Floor Area. The parking is...

We have received the review report from the assessor for our office project. It has been stated that- ''The daily average value should typically be higher than the peak value.'' This statement...

I am working on a three story office building, that is registered as LEED Core & Shell, where the 2nd floor will be built-out for the owner's company, which means we know the occupancy of the...

Hi,
Our project is 133,624 sf. We have completed the form as below

Within the space usage type table, we have 127,832 sf (is this acceptable as it is only a small difference?)
...

We have included all areas of the building within the Default Occupancy Table.
However, there is still the Plant Space we have not included. Can this be omitted? Since default occupancy is...