Hello, I’m working in a Core & Shell building in Bogota, Colombia.

How does one know what baseline glazing type to model. Table 5.5-5 list various Fenestration types but it is not clar which one should be used. Maybe somebody can clarify ? Thanks.

Interior Lighting question. Option 2. Lighting Quality (1 point) A.

I can guess the answer to my question, but am hopeful to be proved wrong: our project is within the 1/4 walking distance to a bus stop with a single service.

Hello Everyone, I have an office project which is designed to use a little compicated HVAC system.

My understanding is that the minimum acceptable Leakage Rate is 0.5%, even if the actual data demonstrate a lower leakage rate.

We have a project that has a two story atrium, running across the 1st and 2nd floor. Is the 2nd floor atrium (empty) space included in the gross area calculations or not?

I would like to check if the Carrier model 30RQ0262 (COPc=2,62 according ARHI test 550/590 despite ASHRAE requires ARI 340/360) will meet that Mandatory Provisions in terms of Equipment Efficiency.

We are using packaged VAV with reheat system 5 for the Baseline System.

Hi all, I need to model in Energy Plus several "Air - Water Heat Pumps": heat pumps that use air as energy source and water as fluid for conditioning.