This credit was fairly easy to meet but I am wondering if all the C&D processing facilites we used must be verified?

Joseph Andracchio Steven Winter Associates LEEDuser Basic Member May 19, 2023- 4:20 pm I typically provide different or updated feedback for each project that utilizes this pilot credit. I note any updated experience, and check the forum to answer any questions. The intent is to provide usable feedback, so the same post every time wouldn't be considered helpful, though if you have the same process and experience, I assume posts would look similar. Log in or register to post comments ...

Feedback from the architecture firm and general contractors re: PC implementation in Southern California

• The LEED credit language was straightforward and intuitive. The difficult...

There are still very few facilities certified under RCI. Projects that have pursued this pilot have all been proximate to the necessary receiving facilities and would have likely used them anyway...

Has anyone had sucess achiving this credit by using an RCI facility for the majority of the waste and then using another facility for the demolition waste? 

A little more context: I am...

Under Credit-Specific Documentation it says, "Recycling rates applied to a project's waste generation must be the weighted average for the facility over the time in which the project sent...

Documentation of this credit was easy because we are using a hauler who has a CORR certified facility that is near to our job.  We tried this pilot credit once before and did not achieve it...

We are pursuing this pilot credit for multiple unrelated projects. Assuming that participating in the LEEDuser pilot credit forum is a general pilot documentation requirement, are we required to...

Credit was straightforward. In our market, there is only one CORR-certified provider. Curious if that's the case in other markets.

Recently a recycler that is CORR certified has been purchased by another organization. This organization has decided to fill a gap in the market by taking on...