Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Metered Lav Faucets No More

CI-v4 WEp1:Indoor water use reduction
posted by  Michelle Rosenberger  on 

I posted this comment on the NC forum in addition to here because there haven't been any responses to questions posed on this forum.

0

UPLOAD GOOD LITERATURE

NC-2009 SSc1:Site Selection
posted by  bojana kovacevic  on 

If someone has good literature ( with clearly defined part for required documentation) of all SS and MR Credits I would be so happy if he/she share it with me.... Best regards!

1
Sat Jan 7, 2017, 10:46 pm

Campus and group

LEED Guidance for Campuses and Multiple Buildings
posted by  Charalampos Giannikopoulos  on 

There are seven existing buildings on a site, all owned (the site and the buildings) by the same entity who leases the buildings to tenants.

0

New Residential Building

NC-2009 EAp2:Minimum Energy Performance
posted by  SSN Energy Model  on 

Hi, We have completed the Energy Model for New Residential Building which will be located in India.

1
Thu Jun 2, 2016, 3:43 pm

Heat pump water heater

CS-v4 EAc6:Enhanced refrigerant management
posted by  Ammon Palmer  on 

We are using a heat pump type water heater. The refrigerant capacity for the unit is over the 0.5 lb threshold.

1
Thu Jun 2, 2016, 10:43 pm

Hotel Room Lighting Exceptional Calculation

NC-2009 EAp2:Minimum Energy Performance
posted by  Jeff Ross-Bain, PE, LEED Fellow, WELL AP  on 

We would like to apply the exceptional calculation method for guest room lighting in a 165-unit hotel.

1
Fri Jun 3, 2016, 3:03 pm

LEED V3 Vs V4

EBOM-2009 EAc3.2:Performance Measurement—System-Level Metering
posted by  VISHESH AGARWAL  on 

Advanced energy metering: if a project have all end use submeter but no have enery reporting software or BAS.

1
Fri Jun 3, 2016, 8:50 pm

Outdoor Air Delivery Monitoring - Installation of CO2 sensors

NC-2009 IEQc1:Outdoor Air Delivery Monitoring
posted by  SAMY Chamy  on 

1. CO2 sensors are installed in our project, but not interconnected with fresh air fans. CO2 sensors will only monitor the CO2 levels and raise an alert when the levels are increased.

1
Mon Jun 6, 2016, 2:11 pm

EPD's for architectural woodwork

NC-v4 MRc2:Building product disclosure and optimization - environmental product declarations
posted by  Paul Setzer  on 

Hello- As I read the v4 MR requirement for EPD's, they apply to assembled products.

1
Mon Jun 6, 2016, 3:00 pm

n/a

NC-2009 EAp2:Minimum Energy Performance
posted by  Francesco Passerini  on 

G3.1.2.5 states: Ventilation.

1
Fri Jun 3, 2016, 2:49 pm