Hi All, 

I would like to consult the derivation of the System Outdoor Air Intake (Vot) for baseline system 7...

For a manufacturing facility where unregulated loads exceed 50% of total energy, can energy efficiency improvements to unregulated manufacturing loads contribute to achieving a greater percentage...

 Hello again to the forum:)... any thoughts on the above? Thank you! Log in or register to post comments 0 Vote up! 1. I recommend reporting the AHUs and FCUs in separate columns, that way you can report their capacities separately.  2. Yes, all systems must be reported in the MEPC. Again, I recommend using separate columns for different types of systems.  Log in or register to post comments 1 Vote up! Thank you  Log in or register to post comments 0 Vote up! ...

Hi All, 

We are modeling an industrial plant including the plant...

I want to make sure if we include the EV charging in Energy Model ? As mentionned in 10499 - EV Charging in Model | U.S. Green Building Council (...

Hi to all,

I am currently carrying out an energy model for a mall building and assigning the baseline HVAC systems to the zones. I am confused about the retail units, there are hundreds of...

forum. So for CS projects you model the proposed as designed. For any systems that are not fully designed you model those the same as the baseline building. Log in or register to post comments 1 Vote up!...

Hi

The maximum allowed fan power per...

My project is a big dry warehouse, which is divided into 7 typical units for future tenants. There is a small office with AC in each unit. My question is can we model 1 typical unit, then...

Hi

My proposed building has a number of unconditioned spaces (per definition according to Appendix G):

- basement: storage and technical area, with mechanical ventilation (the same...