Hi , I am modeling a LEED model for data center, now for vault spaces I am assuming a setpoint of 99 F for cooling and 20 F for heating, what should be band to consider a vault space UMLH? for...

Hello to all LEED Users,

My proposed building has following percentage of glass at each orientation:

NE: 90% percentage of glass

SE: 90% percentage of glass

NW:  90%...

Hi Everyone, 

We are modeling A Data center and the internal walls forvault spaces have insulation in them because of high temperature in the data center vault spaces, Now I am...

Hello to all LEED Users,

Ιn our project the Building (nonresidential – 8.000 m2)  consists of following levels:

• Ground Floor
• 1^st Floor
• 2...

I have a project with a CO2 sensor in the return air duct of a workshop in a school. The energy modeller is taking credit...

Hi, 

For a campus project, we would like to go with option 1 path2 full...

Dear LeedUsers,

In our  project we have PV arrays which produce electricity and provide this electricity to the Network.

1) Can this electricity production  after it converted in...

In one of our LEED ID+C project, we are having scope of 8th floor and the total floor of the building is 12 floor. 
The suitable system as per ASHRAE 90.1 for this scenario is System 8. ...

 Greetings!...

We are doing the energy model for one of our projects. This project is a luxurious resort with LGF, GF, 1F & 2F will be located in KSA.

We have a question...

Hi LEED experts, in LEED v4.1, NC projects with more than 50% unregulated energy cost can apply CS point thresholds to count points. I would like to ask if LEED v4 also applies the same rule....