I'm working on an office project located at the top of a 3-level podium and has a 4-level basement parking. The parking slots are not solely for the office tower (office towers are the ones that...

Hi! According to appendix G if the system is 5 to 10, each floor must be modelled with a separate HVAC. Can I apply for exception, separate hvac system, if in a certain floor there are spaces...

Lorey Flick Partner Flick Engineering Professionals LEEDuser Premium Member 38 thumbs up June 12, 2019- 10:46 am Please disregard the last 3 paragraphs- I copied from a previous forum as I wrote my question...Another question- How do you edit after you post??  Log in or register to post comments Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up June 12, 2019- 2:43 pm In v4 daylighting for the perimeter spaces is required by 90.1-2010. No daylight can't be excluded from spaces where it is required. If you wish to claim savings for daylighting in tenant spaces you will need...

Hi All,

We are having a data center project that all data halls will be rented out (i.e. All IT equipment will be supplied by the tenant after the building completion, however the HVAC...

Hi,

Greetings!

I am doing the Energy Model for G+10 Floors Office building. The total conditioned area is 575,000 Sq ft. The project is connected with District Cooling Plant and I...

Dear Everyone

I am writing regarding to fresh air requirements for Baseline Case. According to new ASHRAE 90.1-2010 requirement it should be modeled according to rating authority or...

Hi,

I am trying to model the lighting power for a core and shell office building, the lighting is designed for the core spaces such as main lobby, restrooms and BOH, but the tenant spaces...

Dear Everyone,

Generaly for CS project we model tenant spaces as unfinnished and we use perimeter/core zonning method.

We are in the middle of creating one project where tenant...

We have a question about the baseline and proposed lighting for tenant spaces, and more specifically how to input those in the LEED v4 Minimum Energy Performance Calculator v05 spreadsheet.

Hi

I am again and again confused by the definitions in ASHRAE 90.1 of semi-heated and conditioned, particularly in connection to our typical projects. We have climate zone 4 or 5 and...