I am working on a project that is designing external vegetated shades/screens. For local code compliance, we are not allowed to include the vegetated shades in our energy model. Are we allowed to...

Hi all

In my project, solar photovoltaic panels are used to preheat domestic hot water, which is then heated by gas-fired boiler to the set temperature.However, solar photovoltaic panels...

Dear all,

Is it possible to correlate vertical fins with projection factors shown in table 5.5.4.4.1 ASHRAE 90.1-2010?

FK 

Hi

Our situation is the following: the outdoor ventilation rates in the proposed building are higher than required by ASHRAE 62.1. Therefore, the baseline model will have lower outdoor...

Dear Everyone

I am quite confused because I got a review comment recently where Reviewer suggests to exclude preheat coils from Baseline System 7. 

It is a project located in Poland...

Hi

I have a query regarding the ASHRAE Office Schedule. During normal occupancy hours the schedule is set to 95% occupancy, however our experience tells us that an 80% occupancy is typical...

Hi,

I am working on an energy model for core and shell office building. To reduce the reheat energy the mechanical designer planning to reduce the minimum stop for fan-powered boxes. If we...

We are currently working on a LEED Core and Shell v4 office building on Santiago, Chile. Regarding the issue of mandatory provisions ASHRAE 90.1-2010, if there is a binding lease or sale...

Hello Dear
I am working in an office project  and another Warehouse Core&Shell rating system. At this moment, we are complying with mandatories of ASHRAE 90.1 only in the parts of Core...

Hi, 

I'm modeling a 12-floor hotel building located in Dubai that uses System 8:...