Can a Core&Shell project achieve this credit by submetering tenant water use?

Reviewer wrote: "Provide narrative confirming that the janitor's closet water usage has not been addressed within the metering capacity and that at least 80% of the indoor plumbing fixtures and...

How detailed does the sub-metering have to be to account for 'at least 80% metered subsystem'?

If a building has only indoor plumbing fixtures (WC, taps, showers) and landscape irrigation...

Hi everyone, we are working on a shopping mall and we wanted to know, in the case that a tenant of the project is going to build bathrooms and kitchens for their particular business, if we have...

We are working on a core and shell project which currently has no indoor plumbing fixtures installed. So we have just one sub-system to meter (irrigation). If we have a meter installed on the...

I am working on a CS project and each tenant space is metered separately with a single meter.

The plumbing in the common areas (hot and cold water) and irrigation make-up (in addition to...

The credit requires to submeter at least 2 of the following subsystems: irrigation, indoor plumbing fixtures and fittings, domestic hot water, boiler,...

I just want to make sure that it is sufficient to meter 2 subsystems; not all that are available in a project. Is this correct?
I a project, there is irrigation and of course fixtures and...

A large office building is being certified using LEED Core & Shell.

The building will have only one water supply source (municipal network). This water will be invoiced to the...

Can a fire suppression water line be one of the sub metered uses to meet the intent of this credit?