Forum quick links
VOC content in wet-applied products vs CIAQMP requirements
NC-v4 EQc3:Construction indoor air quality management planposted by Agnieszka Rylska on
Hello!
I have a question concerning SMACNA requirements. There is the sentence in LEED reference guide:
Transportation rate threshold between 45% and 50%
EBOM-v4 LTc1:Alternative transportationposted by Laura Danzig on
Hi all,
Building Area Method - Interior LPD
NC-2009 EAp2:Minimum Energy Performanceposted by SAMY Chamy on
Dear Concern:-
Ergonomic Strategy - 75% ergonomic workstations
Pilot-Credits EQpc44:Ergonomics approach for computer usersposted by Lisa Marshall on
I recently had a reviewer request a compliance calculation confirming that at least 75% of the tenant occupants have an ergonomic workstation. I do not see this listed anywhere as a requirement.
Outdoor Air for Corridors and Stairs
CS-v4 EQp1:Minimum indoor air quality performanceposted by Ciaran McCabe on
ASHRAE 62.1 requires outdoor air to be provided to corridors - stairs seems to be a grey area ?. If you are using Option 2.
Ventilation rates at unoccupied rooms
CI-2009 IEQp1:Minimum IAQ Performanceposted by Stacey Olson on
This project is in California, and ventilation rates comply with Title 24.
Provide a transportation for pick up/ drop off employees
NC-2009 SSc4.1:Alternative Transportation—Public Transportation Accessposted by Hanh Truong on
Dear all, I have a factory project located in a remote area which does not have public transportation service.
Different type of spaces in a same AHU
Healthcare-v2009 IEQp1:Minimum indoor air quality performanceposted by Paula Hernandez on
We are working on a Healthcare project, and we have several AHUs serving both healthcare spaces, calculated according ASHRAE 170, and common spaces included in ASHRAE 62.1 standard.
Verified Construction & Demolition Recycling Rates Pilot
Pilot-Credits MRpc87:Verified Construction & Demolition Recycling Ratesposted by Juliana Moreira on
I am working on a commercial interiors project in London-UK. The standard for construction waste most commonly used in the UK is the PAS 402.