Log in
Forum » NC-v4 MPR2
Topic

Tolerance within the achievement of criterias due to different affectations

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Audrey LEDESERT on Jun 18, 2020, 4:37 am

Hi,

I'm working on a project with administration affectation and some commercial surfaces on the groundfloor (surface < 40% of the total project surfaces).

As the commercials...

car workshop = retail?

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Benjamin Weise on Apr 29, 2020, 3:10 am

Hello,

is a car workshop to be certified under the "retail" version of LEED v4?

Thanks in advance!

Last reply: Tristan Roberts, May 12, 2020, 10:03 am

Is a new v4 project allowed within an existing earlier LEED version project boundary?

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Neumann Monson on Apr 16, 2020, 4:24 pm

Our client has taken ownership of a property that was LEED certified many years ago under an older version of LEED, maybe NCv2.1.  They would like to build a new LEED certified...

Last reply: Tristan Roberts, Apr 17, 2020, 8:46 am

Group or single project for Warehouse

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Sofia Barahona on Mar 11, 2020, 4:15 pm

We are currently working on a warehouse which has a total of 12,704.13m2, the project consist of a building of storage and operative offices with a total of 12,516.67m2 and a small separate...

Last reply: Summer Minchew, Mar 15, 2020, 8:53 am

Can we certify the commercial portion only of a mixed use building (residential & commercial) under LEED BD+C?

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Amgad Khattab on Feb 6, 2020, 5:14 am

We have a mixed-use building (residential and commercial) but physically and completely separated by a wall. The building with its two uses has the following...

Last reply: Summer Minchew, Feb 6, 2020, 8:37 am

LEED Boundary- works to existing park and library

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by PJ Ryan on Jan 29, 2020, 7:46 am

Hi,

I'm working on a new construction mixed use development which contains both Residential buildings and Office buildings.

Only the Office buildings are being certified - LEED BD...

Last reply: Deborah Lucking, Feb 3, 2020, 10:19 am

LEED Boundary- Police Training Facility

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Josie Plaut on Dec 31, 2018, 2:17 pm

Hi,

I'm supporting the Police Regional Training Center project here in Northern Colorado (not yet registered for LEED v4 BD+C: NC ). The project team is attempting to verify that our...

Last reply: Kara White, Jan 5, 2020, 10:34 am

Emergency generator building

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Priscillia Champagne on Oct 8, 2019, 1:06 am

I am starting a project in which we are building a new addition to an existing hospital which will be approx. 30 000 m2 (considered separate building from existing hospital). In the same scope of...

Last reply: Tristan Roberts, Oct 15, 2019, 7:17 am

Adding wings to a non-certified building

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Mario S. on Sep 4, 2019, 9:10 am

We have a case of an existing hospital building, and the owner now wishes to add 2 wings to it; one on its west side and the other on its east.

In terms of physical connection, the 2 wings...

Last reply: Tristan Roberts, Sep 4, 2019, 10:35 am

Non-certified buildings in LEED boundary

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by MERVE AYGENC on Jan 10, 2018, 7:01 am

Hi everyone,

The project area has two main buildings that just one of them will apply for LEED v 2009 - NC certification. They are totally separate buildings in terms of air-conditioning...

Last reply: Laura strauss, Sep 3, 2019, 5:16 pm