Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Painting

CS-2009 SSc7.1:Heat Island Effect—Nonroof
posted by  Lise Dannesboe  on 

Hi - is it possible to paint the pavement to get the wanted SRI-value for the non-roof? And is there any specific requirements for such a paint?

BR, Lise

0
Default Avatar

is it product or category?!

NC-v4 EQc2:Low emitting materials
posted by  sara m  on 

To achieve the low emittig material credit, it says that category of paintings needs to agree with 90% emission and 100% VOC,, does this mean that each product under category of painting needs to a

1
Mon Nov 13, 2017, 3:13 pm
Default Avatar

adjusted dailyuses for urinal when restroom without urinal exist

CS-2009 WEp1:Water Use Reduction
posted by  Cathy W  on 

The technical advice is like this: The floor plans for PIf4 indicate that the project includes unisex restrooms that do not contain urinals.

3
Sun Nov 12, 2017, 3:21 pm

LEEDonline documentation for car pooling

NC-v4 LTc7:Reduced parking footprint
posted by  soha yamani  on 

on LEED online it is mentioned " For projects with pooled parking, include justification of allotted space"  what does this mean ? what kind of justification is needed here ?

1
Mon Nov 13, 2017, 10:21 pm
Default Avatar

evaluation requirement for materials

NC-v4 EQc2:Low emitting materials
posted by  sara m  on 

hello, 

1
Sun Nov 12, 2017, 7:11 pm
Default Avatar

calculating the diverted & total waste

NC-v4 MRc5:Construction and demolition waste management
posted by  sara m  on 

hello,

1
Sun Nov 12, 2017, 2:54 pm
Default Avatar

One Address but buildings are not physically Attached

EBOM-v4 MPR2:Must use reasonable LEED boundaries
posted by  Jay Murray  on 

The owner of an office property wants to go for LEED EBOM. There are 3 buildings, two are attached with an architectural overhang and the third is roughly 40 feet away.

1
Fri Nov 17, 2017, 12:09 am

MERV 13 Filtration

CS-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Donald Green  on 

In a CS project that is a renovation with existing mechanical equipment - does the existing mechanical equipment need to have the MERV 13 filtration?

1
Fri Nov 10, 2017, 10:34 pm
Default Avatar

Year of SMACNA sited in IAQ plan older than the one listsed in LLT

NC-2009 IEQc3.1:Construction IAQ Management Plan—During Construction
posted by  Chad Thurlow  on 

Hello

1
Fri Jul 13, 2018, 8:25 pm
Default Avatar

Group Approach - construction contract

LEED Rating System Selection
posted by  Ricardo Sá  on 

Dear All,
Regarding LEEd V4, using the group approach, what real means "group must be under the same construction contract"?
That means that the contractor must be the same?

0