high savings in auxillary power

Hi
we are modelling a 18 storey office block in Sap Paulo and getting some results we wanted to cross check, as we doing the energy model for the...

Hi all,

I am performing energy simulations for my baseline and proposed buildings for EAc1 (and EAp2). Can anyone help me out with the baseline wall...

We have a high rise mixed use development in Bangalore, India for which we are following Appendix G methodology for LEED Energy compliance. The project comprises of Office block + Hotel Block +...

Hi,

I have a 6 floors/2000 m² nonresidential building, and I am not sure about the system it should be. Area or number of floors is more relevant when choosing a system? It could be...

RE: LEED CS EAc1
We need input on how to model the 6th floor residential portion of our mixed-use building? Our specific concern is the lighting.
Any help is appreciated.
...

I’m modeling a building for C&S in France.

Normally in my baseline and proposed models I put the same...

Core & Shell Appendix 2 requires that the baseline core and shell HVAC system be modeled per ASHRAE 90.1-2007 Table G3.1.1A. Appendix 2 also dictates the values used for power and lighting in...

After reading through the forum I have not found a response that specifically addresses a CS building who's future tenant finishout of office and warehouse space is yet to be designed but has the...

We have a building which is six stories. The first floor is retail, second thru fifth is office and sixth is residential. All are served from a virtual central plant. This does not fit exactly...

I wonder how I should model a Ventilation system to comply with Apendix G
ASHRAE, it said that my proposed desing shall be consistent with design
documens..
This is the...