Hi all!
We started up a LEED for CS version 4 project and got really good results for the energy model. The owner wants to double certify the building so it also will earn LEED for CS...

Hello,
I’m working on a Core & Shell office building in Bogota and the baseline system is 8. The building has a central cooling system with chillers and air handle units in each floor,...

Hi LeedUsers,

I have one simple question. According to section G3.1.1 of ASHRAE 90.1 Standard each floor for system 5 through 8 shall be modeled with a separate HVAC system. I hope it...

The proposed building is a dormitory served using individual fan coils (with no outside air in the fan coils) and the outside air for the building being supplied by a single dedicated outside air...

Hi all, I have LEED CS with very minimum client provision without AC systems (only emergency lights, emergency fans and lifts). But the main tenant has been agreed from the building and the...

As part of this Prerequisite we have to provide cooling towers that comply with requirements of section 6.4 of 90.1-2007 ASHRAE Standard. In Table 6.8.1G there are performance requirements listed...

I am modeling a core and shell building with 5 floors. This building will be served by two air handling units. Is there any requirement for me to set up a different HVAC system (a copy) for each...

I would like to know if electric motors that are going to be operated by a...

In terms of the Energy Model for Core & Shell is the "Building Area Method" more applicable as the final layout has not been decide yet ?

Hi,

Does anyone know a good step by step guide useful when working on the 90.1 PRM appendix G model ? To make sure all boxes are ticked !