We are working on a Project with a central 100%OA...

Dear sir,
according to G3.1.2.5 of 90.1, Minimum outdoor air ventilation rates shall be the same for the proposed and baseline building designs except that When modeling demand-control...

Two short questions about modeling the envelope:

1. For my proposed model, am I required to follow the tables from appendix A even when my project is outside the US? In Peru, our reality...

Hello,
where can I find an exact definition of "new buildings" and "major renovations" for CS-projects to choose the right category for the energy performance of renovated existing...

Hello,

I made model using eQuest 3.65 and after simulation, baseline building generation and results compliance I see 55 % percent improvement in proposed design against the baseline...

for the issues even when you have many years of eQUEST experience. It is virtually impossible to do so in a forum like this. You might consider seeking a consultant with eQUEST expertise to help you. You might alos find more assistance on the eQUEST Users forum at onebuilding.org. Log in or register to post comments ...

Dear sir,
Our LEED review of EAp2 said that the minimum efficiency for the Baseline Case PTACs should be 9.3 EER.
I cannot understand it clearly and find the corresponding terms in 90...

Hello! My first post here on LEED User.

We are modeling an existing building which has had its rooftop units replaced "in kind", so they are more efficient units, but the same general...

Good evening,

I have a question regarding a situation that I have encountered in more than one project:

Suppose that for a big shopping mall there is a hot water demand for fast...

Hi,

is there some document that specifies precertification requirements for EAp2 (eventually for all prerequisites and credits in LEED CS 2009)?

Thnaks for advice.

Frank