Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Seperated Parking Areas

NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehicles
posted by  Raina Tilden  on 

My project (a combo with lab/office/industiral workshop/conference in one large building) has one driveway that leads to two separate parking areas, one on either side of the main entrance.

2
Thu Feb 20, 2014, 9:23 am

Costs for on-site renewable energy

NC-2009 EAp2:Minimum Energy Performance
posted by  Kai Andrade  on 

It is required to factor in the initial equipment installation costs when calculating the annual cost for on-site renewable energy for a proposed building?

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Feb 20, 2014, 2:56 am

Does Car-Sharing add to the total car parking capacity count?

NC-2009 SSc4.4:Alternative Transportation—Parking Capacity
posted by  Mike Stopka  on 

Hello We have a project with minimum parking requirements set to 238. We have agreed to provide 13 additional car-sharing stations, bringing the total parking effectively up to 251.

5
LEED Project Reviewer, LEED AP BD+C, Senior LEED Specialist
Certifications Department Manager, Epsten Group, Inc.
LEEDuser Basic Member
26 thumbs up
Wed Feb 19, 2014, 11:15 pm

Calculating Walking Distances

ND-v2009 SLLc3:Locations with reduced automobile dependence
posted by  Vita Shklovsky  on 

What are some common methods of measuring walking distances?

5
LEED AP-ND, Principal
Criterion Planners
LEEDuser Expert
231 thumbs up
Wed Feb 19, 2014, 10:36 pm

equipment

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Oleg Petryuchenko  on 

if we have manufacturing equipment on the floor and all area is daylit through skylights, providing even lighting level across the space do we need to exclude sq.

8
Director of Sustainability
DBR Engineering Consultants
LEEDuser Basic Member
244 thumbs up
Wed Feb 19, 2014, 8:30 pm

Number of cycles

EBOM-v4 WEc3:Cooling tower water use
posted by  Jonathan Miller  on 

What is the number of cycles necessary to achieve 1 point? 10?

6
Technical Director, LEED
USGBC
LEEDuser Expert
225 thumbs up
Wed Feb 19, 2014, 3:51 pm

Scope of EAp2 we must include to meet the compliance

CI-2009 EAp2:Minimum Energy Performance
posted by  Takayuki Hirota  on 

We are planning to renovate an existing building which is used as an office, aiming for LEED CI certification.

6
Wed Feb 19, 2014, 11:22 am

MERV for Filters

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Farah A.  on 

Are MERV 13 filtration media used for temporary or permanent air handlers?

3
Default Avatar
LEEDuser Basic Member
7 thumbs up
Tue Feb 18, 2014, 6:25 pm

LEED BD+C Question- Individual Thermal Comfort Controls

NC-2009 IEQc6.2:Controllability of Systems—Thermal Comfort
posted by  Farah A.  on 

A project design team has design their new office space with an open office plan and operable windows to provide natural ventilation.

4
Default Avatar
LEEDuser Basic Member
7 thumbs up
Tue Feb 18, 2014, 3:24 pm

FSC Certified Wood

NC-2009 MRc7:Certified Wood
posted by  Farah A.  on 

I have another ques. regarding Certified Wood- Which of the following FSC products can count towards the Certified Wood criteria ?

6
Default Avatar
LEEDuser Basic Member
7 thumbs up
Mon Feb 17, 2014, 8:40 pm